Series 60 | Series 61
Enduring LED navigation lights with integrated countdown system
115V-230V_AC 24V_DC 5-year-warranty ta55 ta-25 ip66-67 Wheelmark LED

Series 60 - port


Series 60 - starboard


Series 60 - masthead


Series 60 - stern yellow

Series 60 | Series 61

Aqua Signal’s Series 60 and Series 61 are LED navigation lights for vessels from 20 to 50 meters and above 50 meters in length. Long product lifetime has been an essential priority when designing the two single tier lanterns. A smart, tamper proof countdown system will also give the user a warning when it’s time to replace the lanterns. Even at an ambient temperature at 45°C the lifetime is 100 000 hours. 

Navigation lights are all about safety. Glamox has developed Series 60 and 61 to make worries about failing lanterns redundant. 

Long product lifetime 
The Series 60 and 61 are designed to last for 100.000 hours at an ambient temperature of 45°C. That’s twice the lifetime of most competing products. To achieve this kind of longevity the design must be sturdy and all components must be of high quality. This includes a high-quality LED driver and driver technology and the use of materials that can withstand rough weather and varying temperatures, such as seawater resistant aluminium, polycarbonate and hardened tempered glass.

The system lifetime of the LED light source and driver is 11 years given a continuousruntime, 24 hours a day at an ambient temperature of 45°C. 

Integrated countdown system 
Having a lantern come to end of life or fail while you’re at sea is something you don’t want to risk. This is why the Series 60 and 61 are equipped with a countdown system that will let you know when it’s time to replace the navigation light. To make the system tamper proof the timer is integrated in each lantern while the message is communicated and displayed in the control panel. The system reflects the use of the lantern, whether it is exposed to cold temperatures and harsh weather or conditions with less wear and tear. This system provides added safety for the vessel. 

Low EMC values
There are strict requirements for electromagnetic computability (EMC) for lanterns that should be installed close to VHF antenna. Our lanterns type 60 and 61 have a low emission level and were tested and comply with the emission and immunity requirements of the IEC 60945. 

A flexible choice 
Series 60 and 61 are designed to work with the Aqua Signal Navigation light control panel, but they offer a lot of flexibility because they can be operated with third party panels (1). The products are easy to install, only four bolts to fastenand the internal connection box offers a lot of space for connection wires. It can be installed upside-down for all variants, with exception of Port, Starboard and Masthead due to visibility angels in COLREG requirements. 

(1) Compatibility must be confirmed by control panel supplier. For vessels above 50 meters, using Series 61, a dual installation is required (for Masthead, starboard, port and stern). To be according to COLREG requirements.
Series 60-61_meters-to-use


Series 60: vessels from 20 to 50 m in length.
Series 61: vessels >50 m in length.

Basic facts

Lightsource: LED
Protection class: IP66/IP67
Ambient Temperature: -25°C ≤ T ≤ 55°C
Voltage: 115V-230V AC or 24V DC
Frequency: 50/60 Hz


Polycarbonate housing and housing cover.
Borosilicate glass.
Top: Seawater resistant aluminium
Stainless screws and nuts (Hexagon nuts M6)

Cable Gland

Cable gland M25 x 1.5 
Polyamide, for outer cable Ø 9,00-17,00 mm 
Up to 400 m cable run


The products have gone through a series of tests including:

1.Shock tests (up to 15g, 3-Axes)
2.Vibration testing (2.3g for 2 hours)
3.Climatic testing (-25°C up to +55°C)
4.Salt mist spray tests (level 6 at 1000 hours)
5.EMC testing
6.Tests for IP rating (Dust and water)

Dimensions & Weight

Dimension: 154 mm × 190 mm × 180 mm
Weight of plastic luminaire 24V: 1,5 kg
Weight of plastic luminaire 115V–230V: 1,9 kg


Large junction box and easy access to terminals
• Minimum cable cross-section: 1.5 mm²
• Maximum cable cross-section: 2.5 mm²
• Maximum cable length must not exceed 400 meters

• Can be operated by third party navigational light control panels
• Supplier of control panel must confirm compliance with Series 60 / Series 61
• Able to measure low current draw

Closing of housing
• Hexagon nut M6 in all lateral slots
• Torque max 2,0 Nm

Easy to install to vessel structure

• Only four bolts to fasten
• Same dimensions as Series 55
• Can be installed upside-down


UL (pending)
RMRS (pending)


EN 14744 (20015 – including AC 2006) Inland and Seagoing vessels - Navigational lights standards

IEC 60945 Ed. 4.0, 2002 including Corr.1, 2008 Maritime navigation and radio equipment standards, including EMC

COLREG 72, Annex I/14 International regulations for preventing collisions at sea

MSC.253(83) Performance standards for navigational lights and control panels and associated equipment.
Series 60-61_meters-to-use

Series 60 - view inside


Series 60 - slots


Series 60 - port cover


Series 60 - starboard cover


Series 60 - masthead cover

Series_60_yellow_stern cover

Series 60 - stern yellow cover


Series 60 - port


Series 60 - starboard


Series 60 - masthead


Series 60 - stern yellow

Product detail

Series_60_insideview_01 Series_60_slot_detail_with_tool Series_60_port_cover Series_60_Starboard_cover Series_60_Masthead_cover Series_60_yellow_stern cover Series_60_port_with_light Series_60_starboard_with_light Series_60_masthead_with_light Series_60_stern_yellow_with_light

Product environment

Series_60_Foto_Sofi_Lundin_Redningsselskapet Series_60_Foto_Redningsselskapet Series 60-61_meters-to-use
Find your version

Use this button to find the exact version of this series, article numbers and more product details.



Marketing materials

Total size


Marine, onshore and offshore solutions