GPV2 | GPV2 LED
Solid solution
logo_brand_glamox
IP67 CE ENEC LED DIM emergency mounting_ld_surface_celing-2 mounting_ld_surface_wall-2 t5 t8
gpv2_2tube

GPV2 2 tubes

gpv2_led_pc

GPV2 LED

GPV2 | GPV2 LED

GPV2 is an IP67 luminaire for mounting on ceiling or wall.

The luminaire housing is manufactured in grey recyclable glass and reinforced polyester. The diffuser is supplied in polycarbonate with stainless steel clips.

Available in 1 and 2 tubes variants. Some variants can be delivered with emergency lighting systems.

Light source

1 x T5 28, 35, 49W
2 x T5 28, 35, 49W
1 x T8 18, 36, 58W
2 x T8 36, 58W

LED 

Driver

Electronic ballast (HF), analogue dimming (HFDa), digital dimming (HFDd) or DALI. Driver life time up to 120.000 h/10 % (max failure) at Ta 25°C.

Body material & colour

Luminaire housing in grey recyclable glass reinforced polyester.
Polycarbonate diffuser (PC). White painted geartray. Diffuser clips in stainless steel.

Some variants can be delivered with polystyrene diffuser (PS) specially suitable for environment exposed to ammonia gas.

Mounting

Directly on ceiling, wall or luminaire tracks, alternatively by use of suspension brackets to be ordered separately. On horizontal wire by use of accessories.

Accessories

Reflector in anodised aluminium
Suspension brackets

Connection

5 pole 2,5 mm² screw terminal block. 1 x M20 cable gland in each end (cabel Ø7 - 14 mm).
5 x 2,5 mm² through wiring.

Integrated emergency light

Some variants can be supplied with emergency lighting systems.
gpv2_1-_and_2-tube

GPV2 1 and 2 tube

Product detail

gpv2_1-_and_2-tube
gpv2
GPV2  B  L  H
 C
 1x36W  115  1312  108  800
 1x58W  115  1612  108  1100
 1x28W  115  1312  108  800
 2x36W  185  1312  108  800
 2x58W  185  1612  108  1100
 2x28W  185  1312  108  800
 2x35/49W  185  1612  108  1100
GPV2-600 LED
 172  702  105  500
GPV2-1200 LED
 172  1312
 105  800
GPV2-1500 LED
 172  1612  105
 1100

GPV2 | GPV2 LED

GPV2  B  L  H
 C
 1x36W  115  1312  108  800
 1x58W  115  1612  108  1100
 1x28W  115  1312  108  800
 2x36W  185  1312  108  800
 2x58W  185  1612  108  1100
 2x28W  185  1312  108  800
 2x35/49W  185  1612  108  1100
GPV2-600 LED
 172  702  105  500
GPV2-1200 LED
 172  1312
 105  800
GPV2-1500 LED
 172  1612  105
 1100
GPV2 258 PC

GPV2 2x58W

energy-label_gpv2_led

Measurement drawings

gpv2

Light measurement drawings

GPV2 258 PC

Energy label

energy-label_gpv2_led

Heathrow Airport LED upgrade

heathrow_airport_dsc7819park

Recently a major upgrade to LED lighting has been carried out, in cooperation with Glamox Luxo Lighting. The project includes a variety of key locations at the airport, such as terminals, control posts, car parks and more.

Important cost savings 
This investment in the latest energy-efficient technology will contribute to improved passenger ambience, and at the same time reduce the airport’s energy and CO2 consumption.

Heathrow has set a target to reduce its absolute CO2 emissions from fixed sources by 30% on 1990 levels by March 2020. Significant savings will also be made on maintenance costs:

Heathrow, a major hub airport, has particularly high costs of access for maintenance. In all areas maintenance can only be carried out during a few hours at night. The airport’s new LED lighting solutions are virtually maintenance free, so that 100% lighting levels can be upheld without cumbersome and time consuming light source changes.

Project descriptions

Project 1: Car parks at Terminals 2, 3 and 4
In the terminal car parks most of the lighting was provided by traditional 5ft 2x58 Watt corrosion proof luminaries, using approximately 122 Watt each. The airport was aiming to reduce energy costs and maintenance cycles, while improving the experience for the passengers/users.

Our solution
Looking at the client’s requirements and specifications for these area types, we looked at a one-for-one replacement using 4ft Glamox GPV2 LED running at 40 watt per fitting. This enabled us not only to meet the requirements, but also to use a third of the power consumption, showing massive energy savings.

In some circumstances 2ft GPV2 LED were used on the perimeters in place of single 5ft luminaries. Utilizing external light sensors and daylight switching, further reductions in the energy consumption were obtained. On the ground floor of the Terminal 3 car park we used the i80 at high level in place of discharge lights and incorporated occupancy sensors on alternate lights.
 
Product types: GPV2 LED & i80



Project 2: Terminal 4 entrance canopy (Arrivals)

The old terminal entrance lighting was on 24/7. Here the airport was using 250 Watt metal halide high bay luminaires recessed into the ceiling, which is 8 metres high. These luminaries had started to fail and fall into disrepair. The airport was looking at reducing the energy consumption and improving maintenance. Access was a major issue.

Our solution
By using Glamox i80 mounted within the recess and supplying an external bezel we actually improved the energy consumption by 69%, while contributing greatly to improved maintenance. With the aid of external daylight sensors some 70% of the luminaries are now switched off during daylight hours, thus providing further energy savings.

Product types: i80 LED 8000 DALI 840 MB HTG


 
Project 3: Passenger Subways linking Terminals 1, 2 and 3

The passenger subway linking the terminals at Heathrow were lit by a combination of linear fluorescent tubes and recessed and surface mounted CFL downlights. Subway transfers were not a particularly pleasant experience for passengers. It was important that we should be able to enhance the lighting in these areas.

Our solution
In cooperation with lighting designers Studio Fractal and installer Crown House Technologies, it was decided to redesign the entire system’s lighting scheme. We used Glamox C50-SR LED RGB for the wall wash. This makes it possible to change the colour of the walls in order to make the lighting more exciting. All recessed and surface mounted downlights were substituted with LED models. As a result, the passenger tunnels are now well lit and have a much more pleasant ambience.

Product types: C50-SR RGB, D70-R195 LED and i75 LED



Project 4: Security control posts

The vehicles security control posts are a particularly important part of an airport’s security system. All vehicles entering the airport area are thoroughly checked in full light, 24/7. The old 250 Watt metal halide floodlights at some of the control posts were failing, diffusers were discoloured and maintenance was becoming an issue.

Our solution
An upgrade was made at a total of four security control posts. Changing to Glamox GPV2 LED luminaires gave good energy savings and reduced maintenance costs. We also suggested the use of Glamox i80 mounted on the columns using our turnable bracket. This again gave good energy savings and reduced maintenance costs.  It also enhanced the lighting in these areas to a very high standard. Airport management is now looking to roll this out to other control posts across Heathrow. 

Product types: i80 and GPV2 LED
 
View reference

Find your version

Use this feature to find the exact version of GPV2 | GPV2 LED that you are looking for. Find article numbers and product details, spec sheets, lighting details, accessories and relevant documentation.


Documents

701KB
729KB
~3MB

RFA Revit Files

145KB

RFA-Revit-Files

Total size
Download

Corporate

Marine, onshore and offshore solutions