i80
Robust and powerful industrial LED luminaire
logo_brand_glamox
Ta-40 ta50 bws_mark CE d-mark ENEC LED ik08-09 silver_reflector mounting_ld_pendant_celing_down-2 mounting_ld_receed_celing-2 mounting_ld_surface_celing-2 mounting_surface_wall_down
i80_g2_led_nb

i80 NB

i80_g2_led_nb

i80 XNB

i80_g2_led_mb

i80 MB

i80_g2_led_op

i80 OP

i80

Glamox i80 is a family of IP66 industrial LED luminaires for surface and pendant mounting or in open ceilings by use of a recessing frame. Can be used in ambient temperatures (Ta) from 50°C down to -40°C.

Efficient and Versatile
Delivers up to 22000 lumen out of the luminaire with a high CRI of 80. The product is designed to light industrial facilities, ware houses, production areas, workshops and cold storages down to Ta -40°C. Also ideal for active use in sports halls with good light and minimum glare.  With its powerful light output, i80 is well suited for use in areas with high ceiling heights and is an energy efficient replacement for discharge lamps.

Quality materials
The luminaire housing is manufactured in die-cast aluminium with low content of iron and copper. Epoxy/polyester powder coated paint finish. The coating thickness is minimum 60 μm and i80 comply with corrosion class C4. Supplied with medium beam - (MB), narrow beam (NB) and extreme narrow beam (XNB) reflector in silver coated aluminium. Front glass in a heat soak tested tempered glass (HTG) with extra high light transmission or impact resistant clear acrylic (CL) front cover. Opal film (OP) as option.
env_i80_industry
env_i80_sports-hall
env_i80_ceiling-heights
environment_i80_helicopter-hangard_03

Lichtbron

LED 7000 - 22000 Lumen Out

Light source information:
4000 Kelvin, 3000K on request. CRI 80. MacAdams 3.

Voeding

Fixed output (HF) or DALI dimmable (10-100%). 
Some variants can be dimmed down to zero (DALI-Z).

Driver life time up to 120.000 h/10 % (max failure) at Ta 25°C.

Materiaal behuizing & kleur

Luminaire housing in die-cast aluminium with low content of iron and copper (EN AB-44100). Epoxy/polyester powder coated paint finish. Aluminium grey (RAL 9006). Reflector in silver coated aluminium. Front glass in heat soak tested tempered glass (HTG) or impact resistant clear acrylic (CL) front cover. The type of glass is extra-white and specially coated on both sides to get high light transmission. Opal film (OP) as option. Silicone free gasket. Screws made of acid proof steel.


Montagewijze

Ceiling or wall, on luminaire tracks, side by side in cluster, on horizontal wire or pendant. Suspension brackets have to be ordered separately.

i80 LED can also be mounted in open ceilings by use of a recessing frame.

Accessoires

Kit for chain suspension (4m)
Double wire suspension kit (4m)
Bracket for horizontal wire
Ceiling bracket
Cluster bracket
Revolvable bracket
Recessing frame for open ceilings
Wieland female plug IP68
Wieland splitter plug IP68

Aansluiting

Standard i80 is supplied with pre-assembled 30 cm 3x1,5 mm² rubber cable (H07RN-F) and Wieland IP68 plug RST20i3 for fixed output and 30 cm 5x1,5 mm² rubber cable (H07RN-F) and Wieland IP68 plug RST20i5 for DALI.

A standard i80 and a through wiring (TW) variant have to be connected when mounted in cluster. The TW variant is equipped with two cables and plugs (male and female).

Optiek

Medium beam - (MB), narrow beam (NB) and extreme narrow beam (XNB) reflector in silver coated aluminium. Opal film (OP).
env_i80_warehouse
env_i80_sports-hall
env_i80_ceiling-heights
env_i80_cold-room
env_i80_industry
environment_i80_helicopter-hangard_01
environment_i80_helicopter-hangard_02
i80_oasen_namsos_1

Suitable for use in swimming pool areas

When using coated acid proof steel suspension brackets, i80 can be used in swimming pool areas where the requirements for corrosion class up to C4 apply.
i80_oasen_namsos_3
i80_cooling-ribs

Cooling ribs

i80_cpw

CPW

i80_ceiling-bracket

Ceiling bracket

i80_revolvable-bracket

Revolvable bracket

i80_cluster

Bracket for cluster

i80_bracket_horizontal-wire-2

Bracket for horizontal wire

Product detail

i80_cooling-ribs i80_cpw i80_ceiling-bracket i80_revolvable-bracket i80_cluster i80_bracket_horizontal-wire-2

Product omgeving

env_i80_warehouse env_i80_sports-hall env_i80_ceiling-heights env_i80_cold-room env_i80_industry environment_i80_helicopter-hangard_01 environment_i80_helicopter-hangard_02 i80_oasen_namsos_1 i80_oasen_namsos_3
i80

i80 G2

i80_cluster

i80 cluster

i80 LED 10000  G2 840 MB

i80 Medium Beam G2

Heat soak tested tempered glass (HTG)
i80 LED 10000  G2 840 NB

i80 Narrow Beam G2

Heat soak tested tempered glass (HTG)
i80 LED 14000 G2 840 XNB HTG

i80 Extrem Narrow Beam G2

i80 LED 10000 G2 840 OP HTG

i80 OP G2

energy-label_i80_led

Lichtverdelingscurve

i80 LED 10000  G2 840 MB i80 LED 10000  G2 840 NB i80 LED 14000 G2 840 XNB HTG i80 LED 10000 G2 840 OP HTG

Maatvoeringen

i80 i80_cluster

Energielabel

energy-label_i80_led

Heathrow Airport LED upgrade

heathrow_airport_dsc7819park

Recently a major upgrade to LED lighting has been carried out, in cooperation with Glamox Luxo Lighting. The project includes a variety of key locations at the airport, such as terminals, control posts, car parks and more.

Important cost savings 
This investment in the latest energy-efficient technology will contribute to improved passenger ambience, and at the same time reduce the airport’s energy and CO2 consumption.

Heathrow has set a target to reduce its absolute CO2 emissions from fixed sources by 30% on 1990 levels by March 2020. Significant savings will also be made on maintenance costs:

Heathrow, a major hub airport, has particularly high costs of access for maintenance. In all areas maintenance can only be carried out during a few hours at night. The airport’s new LED lighting solutions are virtually maintenance free, so that 100% lighting levels can be upheld without cumbersome and time consuming light source changes.

Project descriptions

Project 1: Car parks at Terminals 2, 3 and 4
In the terminal car parks most of the lighting was provided by traditional 5ft 2x58 Watt corrosion proof luminaries, using approximately 122 Watt each. The airport was aiming to reduce energy costs and maintenance cycles, while improving the experience for the passengers/users.

Our solution
Looking at the client’s requirements and specifications for these area types, we looked at a one-for-one replacement using 4ft Glamox GPV2 LED running at 40 watt per fitting. This enabled us not only to meet the requirements, but also to use a third of the power consumption, showing massive energy savings.

In some circumstances 2ft GPV2 LED were used on the perimeters in place of single 5ft luminaries. Utilizing external light sensors and daylight switching, further reductions in the energy consumption were obtained. On the ground floor of the Terminal 3 car park we used the i80 at high level in place of discharge lights and incorporated occupancy sensors on alternate lights.
 
Product types: GPV2 LED & i80



Project 2: Terminal 4 entrance canopy (Arrivals)

The old terminal entrance lighting was on 24/7. Here the airport was using 250 Watt metal halide high bay luminaires recessed into the ceiling, which is 8 metres high. These luminaries had started to fail and fall into disrepair. The airport was looking at reducing the energy consumption and improving maintenance. Access was a major issue.

Our solution
By using Glamox i80 mounted within the recess and supplying an external bezel we actually improved the energy consumption by 69%, while contributing greatly to improved maintenance. With the aid of external daylight sensors some 70% of the luminaries are now switched off during daylight hours, thus providing further energy savings.

Product types: i80 LED 8000 DALI 840 MB HTG


 
Project 3: Passenger Subways linking Terminals 1, 2 and 3

The passenger subway linking the terminals at Heathrow were lit by a combination of linear fluorescent tubes and recessed and surface mounted CFL downlights. Subway transfers were not a particularly pleasant experience for passengers. It was important that we should be able to enhance the lighting in these areas.

Our solution
In cooperation with lighting designers Studio Fractal and installer Crown House Technologies, it was decided to redesign the entire system’s lighting scheme. We used Glamox C50-SR LED RGB for the wall wash. This makes it possible to change the colour of the walls in order to make the lighting more exciting. All recessed and surface mounted downlights were substituted with LED models. As a result, the passenger tunnels are now well lit and have a much more pleasant ambience.

Product types: C50-SR RGB, D70-R195 LED and i75 LED



Project 4: Security control posts

The vehicles security control posts are a particularly important part of an airport’s security system. All vehicles entering the airport area are thoroughly checked in full light, 24/7. The old 250 Watt metal halide floodlights at some of the control posts were failing, diffusers were discoloured and maintenance was becoming an issue.

Our solution
An upgrade was made at a total of four security control posts. Changing to Glamox GPV2 LED luminaires gave good energy savings and reduced maintenance costs. We also suggested the use of Glamox i80 mounted on the columns using our turnable bracket. This again gave good energy savings and reduced maintenance costs.  It also enhanced the lighting in these areas to a very high standard. Airport management is now looking to roll this out to other control posts across Heathrow. 

Product types: i80 and GPV2 LED
 
Bekijk Referentie

Vindt uw versie

Gebruik deze functie om de gewenste versie te vinden van i80. Vindt artikelnummers en product details, specificaties, productbladen, accessoires en relevante documentatie.


Documenten

8MB
520KB
141KB
729KB
~3MB

RFA Revit bestanden

145KB

RFA-Revit-Files

Totale grootte
Download

Gerelateerde producten

i85_led_4500_xwb
i85_led_4500_xwb

i85

Energy efficient and vandal resistant IP66 LED luminaire with compact design