Eminent
Multipurpose luminaire for ceiling or wall mounting
logo_brand_luxo
IP20IP44CEENECDIMemergencypir_sensormounting_ld_surface_celing-2mounting_ld_surface_wall-2t5
eminent_opal

Eminent with opal diffuser

Eminent is offered with a choice of opal or clear diffuser. It is available with dimming and an integrated emergency lighting unit.
eminent_clear
Eminent is a multi-purpose IP20/IP44 luminaire for indoor or outdoor use. Eminent can be used both as a ceiling and wall luminaire
Find your version

Use this feature to find the exact version of Eminent that you are looking for. Find article numbers and product details, spec sheets, lighting details, accessories and relevant documentation.


Download

Documents

147KB
298KB
~3MB

RFA 3D Revit Files

33MB
Total size
Download

Eminent

Eminent is a multi-purpose IP20/IP44 luminaire in compact design for indoor or outdoor use in various settings. Eminent can be used both as a ceiling and wall luminaire. Eminent has a body in white finished galvanised steel with plastic end caps. It is offered with a choice of opal or clear diffuser. It is available with dimming and an integrated emergency lighting unit.

Eminent with sensor
Eminent is available with built-in presence detector in two different versions; ON/OFF operating with standard electronic ballast and MIN/MAX operating with dimmable electronic ballast.

The ON/OFF version turns the light on when detector is triggered and turns the light off, after a delay time, when the room is unoccupied.

The MIN/MAX version dims the light down from 100% to 10% output, after a delay time, when the room is unoccupied, and rapidly back to 100% when the detector is triggered.

Master/slave functionality
Both sensor versions can control a group of other Eminent luminaires.                

Light source

1 x T5 28, 35, 49W.
2 x T5 14, 28, 35, 49W.

Supplied with or without light sources.

Ballast

Electronic ballast (HF), analogue dimming (HFDa), digital dimming (HFDd) or DALI.

Body material & colour

Body in white finished galvanised steel with end caps in PC/ASA plastic.

Mounting

Ceiling or wall, on luminaire tracks or on horizontal wire. Can be used in evacuation shelters using a special evacuation shelter bracket.

Connection

1 x Ø19 mm knockout in each end cap and 2 x membrane glands in top of luminaire housing.
5 pole 2,5 mm² push-in terminal block.
5 x 2,5 mm² through-wiring on request.

Optics

Clear linear prismatic acrylic diffuser (CL).
Opal  linear prismatic acrylic diffuser (OP).
(Polycarbonate diffuser on request).

Integrated emergency light

Most variants can be supplied with emergency lighting systems (Standard, SelfTest or DALI addressable).

Integrated sensors

Some variants can be supplied with ultra-sonic movement sensor type U-SEN.

Light measurement drawings

EMINENT 228 CL EMINENT 228 OP

Measurement drawings

eminent
eminent
 Eminent
 W  H
  L
  CC
       14 W
  153 mm
  50 mm
    640 mm
    485 mm
       28 W
 153 mm
  50 mm
  1240 mm
  1085 mm
 35, 49 W
  153 mm
  50 mm
  1540 mm
  1385 mm

Eminent

 Eminent
 W  H
  L
  CC
       14 W
  153 mm
  50 mm
    640 mm
    485 mm
       28 W
 153 mm
  50 mm
  1240 mm
  1085 mm
 35, 49 W
  153 mm
  50 mm
  1540 mm
  1385 mm
EMINENT 228 CL
Eminent 3745-228 with clear linear prismatic acrylic diffuser (CL).
EMINENT 228 OP
Eminent 3745-228 with opal linear prismatic acrylic diffuser (OP).

Dundee Schools PPP

dundee_534x295px-02

The project includes an extensive selection of lighting solutions for the classrooms, corridors, offices, changing rooms, toilets, gym, stores and main halls. These encompass downlighters, surface luminaires, suspended indirect/direct products installed into suspended ceilings and luminaires for use in dirty and humid surroundings.

Installer: McGill Electrical
Consultant: Wallace Whittle View reference

Dunning Primary School

2009_0115image0002

A complete supply of interior lighting with a mixture of surface mounted, semi-recessed and pendant luminaries complementing the interior design.

The client complemented GlamoxLuxo on the quality of supply and project management which has led to additional projects with Perth and Kinross and indeed other local authorities.

Client - Perth and Kinross Council
Design Engineer - John Beveridge
Architect - Sundeep Salins
Contractor - McGill Electrical
Contract Engineer - Richard Gee View reference

Harris Building, University of Dundee.

u-o-d-harris-building-012

Utilising a variety of surface and pendant luminaires, and where possible using the same wiring points proved a challenge on this particular project. Combining the product knowledge of the local Glamox Luxo engineer with the design skills of the University estates office lead to a project on budget and on time, whilst vastly improving the quality of light in the space. View reference