ES-System

FX45-P1082 0/100 WH 2000 WR 840 CPW2-SEN C2.5 OP/PC

Glamox CPW2 sensor is a combined PIR and daylight sensor for our Wireless Central monitoring system. This sensor connects the luminaire to our advanced wireless Radio system where large installations can be monitored.

This item is a part of our Glamox Wireless Radio system. An easy to use building wide solution designed for central monitoring. A smart and easy way to connect the complete light installation without using extra cabling.

See also our Knowledge base

Item No.
FXX145004
GTIN
5903531450113
Stock status
C
Items and Accessories
FX45-P1082 0/100 WH 2000 WR 840 CPW2-SEN C2.5 OP/PC

Technical specifications

  • General

    1. Product shape
      Linear

  • Certificates

    1. Certification
      HACCP

  • LMS System

    1. LMS Wireless solution
      868 MHz
    2. Number of DALI addresses
      1
    3. LMS Protocol
      Wireless

  • Electrical Data

    1. Leakage current (mA)
      0.25
    2. Voltage from (V)
      220
    3. Maximum voltage (V)
      240
    4. Minimum frequency (Hz)
      50
    5. Maximum frequency (Hz)
      60
    6. Total consumption (W)
      18
    7. IEC Protection Class
      I
    8. Number of luminaires on a 10A MCB type B
      10
    9. Number of luminaires on a 10A MCB type C
      16
    10. Number of luminaires on a 16A MCB type B
      16
    11. Number of luminaires on a 16A MCB type C
      26

  • Technical Data

    1. Minimum ambient temperature (ºC)
      0
    2. Maximum ambient temperature (°C)
      25
    3. IK classification
      07
    4. IP classification
      20
    5. Corrosion class
      C3

  • Light Technical Data

    1. Light source
      LED
    2. Lumen out (lm)
      2,000
    3. Lumen per Watt (lm/W)
      111
    4. Lamp colour temp (K)
      4000
    5. CRI Colour rendering index
      >80
    6. Light distribution up %
      0
    7. Light distribution down %
      100
    8. MacAdam step
      3
    9. Energy class light source
      C
    10. Minimum dim level (%)
      1
    11. Dimmable
      No

  • Driver / Ballast

    1. Type of LED Driver
      WR: Wireless Radio
    2. Number of Driver
      1

  • Lifetime

    1. L70 Median useful life LED Ta25 (hr)
      >100 000
    2. L80 Median useful life LED Ta25 (hr)
      >100 000
    3. L90 Median useful life LED Ta25 (hr)
      50 000
    4. Driver lifetime at Ta=25, 10% failure rate (h)
      100,000
    5. Luminous flux decline (LLMF) 50.000h Ta25
      0.90

  • Sensor

    1. Sensor type
      PIR+Daylight harvesting (CLS)
    2. Detection angle crosswise (°)
      64
    3. Detection angle lengthwise (°)
      55
    4. Factory setting Hold time (minutes)
      10
    5. Factory setting On level (%)
      100
    6. Factory setting Standby time (minutes)
      10
    7. Factory setting Standby level (%)
      10
    8. Max mounting height / detection range (metre)
      4
    9. Sensor max hold time
      2h
    10. Sensor min hold time
      30sec
    11. Sensor standby power consumption (W)
      0.50

  • Housing

    1. Main body material
      Aluminium
    2. Body colour
      White
    3. Main body colour name
      Traffic white
    4. Main body colour RAL code
      RAL 9016
    5. End cap material
      Aluminium
    6. End Cap colour
      White

  • Dimensions

    1. Length (mm)
      1,082
    2. Width (mm)
      44
    3. Height (mm)
      65

  • Termination

    1. Termination
      3x2.5mm2 Push In

  • Cable

    1. Cable Cross section (mm²)
      0.75
    2. Cable End / Plug Name
      Open End
    3. Cable length (m)
      2.50
    4. Cable material
      PVC
    5. No of leads
      3
    6. Cable diameter variation max (mm)
      7

  • Cable Inlet

    1. Number of cable entries
      1
    2. Max cable diameter (mm)
      10

  • Mounting

    1. Product mounting
      Pendant,Ceiling surface

Illustrations

Loading...

Downloads

No downloads available

Images

Loading...

Items

Item type:

Showing 0 - 0 of 0 products

Filter