FX65-P1082 0/100 WH 3000 WR 840 CPW2-SEN C2.5 OP
Glamox CPW2 sensor is a combined PIR and daylight sensor for our Wireless Central monitoring system. This sensor connects the luminaire to our advanced wireless Radio system where large installations can be monitored.
This item is a part of our Glamox Wireless Radio system - an easy to use, scalable building wide solution designed for central monitoring. It's a smart and easy way to connect the complete light installation without using extra cabling.
See also our Knowledge base
- Item No.
- FXX145008
- GTIN
- 5903531450083
- Stock status
- E
Technical specifications
General
- Product shapeLinear
- Product shape
Certificates
- CertificationHACCP
- Certification
LMS System
- LMS Wireless solution868 MHz
- Number of DALI addresses1
- LMS ProtocolWireless
- LMS Wireless solution
Electrical Data
- Leakage Current (mA)0.25
- Main Feed AC (V) Min220
- Main Feed AC (V) Max240
- Main Feed Frequency Min50
- Main Feed Frequency Max60
- Total Consumption (W)26
- IEC Protection ClassI
- Number Of Luminaire MCB 10B10
- Number Of Luminaire MCB 10C16
- Number Of Luminaire MCB 16B16
- Number Of Luminaire MCB 16C26
- Leakage Current (mA)
Technical Data
- Minimum TA (ºC)0
- Maximum TA (ºC)25
- IK classification08
- IP classification20
- Corrosion classC3
- Minimum TA (ºC)
Light Technical Data
- Light sourceLED
- Lumen Out (lm)3,000
- Lumen Per Watt (lm/W)115
- Lamp colour temp (K)4000
- Colour Rendering Index>80
- Light Distribution Up %0
- Light Distribution Down %100
- MacAdam step3
- Energy Class Light SourceC
- Minimum Dim Level (%)1
- DimmableYes
- Light source
Driver / Ballast
- Type of LED DriverWR-D: Wireless Radio DALI
- Number of Driver1
- Type of LED Driver
Lifetime
- LED Lifetime L70B50 Ta25 (h)>100 000
- LED Lifetime L80B50 Ta25 (h)>100 000
- LED Lifetime L90B50 Ta25 (h)50 000
- Driver lifetime at Ta=25, 10% failure rate (h)100,000
- Luminous flux decline (LLMF) 50.000h Ta250.90
- LED Lifetime L70B50 Ta25 (h)
Sensor
- Sensor TypePIR+Daylight harvesting (CLS)
- Sensor Cover Cross (°)64
- Sensor Cover Length (°)55
- Factory setting Hold time (minutes)10
- Factory setting On level (%)100
- Factory setting Standby time (minutes)10
- Factory setting Standby level (%)10
- Max mounting height4
- Max Hold Time2h
- Min Hold Time30sec
- Standby Power Consumption (Sensor) (W)0.50
- Sensor Type
Housing
- Body MaterialAluminium
- Body ColourWhite
- Main Body Colour NameTraffic white
- Main Body Colour RAL codeRAL 9016
- End Cap MaterialAluminium
- End Cap ColourWhite
- Body Material
Dimensions
- Length (mm)1,082
- Width (mm)65
- Height (mm)80
- Length (mm)
Termination
- Termination3x2.5mm2 Push In
- Termination
Cable
- Cable Cross section (mm²)0.75
- Cable End / Plug NameOpen End
- Cable Length (m)2.50
- Cable MaterialPVC
- No of Leads3
- Cable diameter variation max (mm)7
- Cable Cross section (mm²)
Mounting
- Number Of Suspensions3
- Product MountingPendant,Ceiling surface
- Number Of Suspensions
Illustrations
Loading...
Downloads
No downloads available
Images
Loading...