MAX T8
Ex-e hazardous area luminaire for flourescent tubes
logo_brand_glamox
5-year-warranty ta-30 ta50 ip66-67 atex csa IECEx LED zone-1 t8
MAX 2x18 emergency

MAX T8 2 x 18W with emergency

MAX 2x36 emergency

MAX T8

MAX T8

MAX T8 is an Ex e high quality longlife luminaire. The luminaire has a hinged geartray for easy maintenance.
 
The luminaire housing is made of Galfan (Z) or acid resistant steel (S), with white stove enamelled epoxy/polyester powder finish. Housing of Galfan (Z) is not suitable for marine outdoor installation. The cover is made of impact-proof polycarbonate. The emergency model is supplied with an external battery box for lower temperature of the battery to increase the lifetime in warm areas. Emergency light versions (18W and 36W) are available with 1.5 or 3-hours battery duration (T4).

Light source

T8 version: 
Two tubes T26 (T8), 18 or 36W. Variants with light sources mounted available on request. Ex-approved lamp holders.

LED version:
LED tubes designed for MAX fixtures. Tubes are with opal diffuser for evenness light output looking similar to fluorescent tubes. Tubes are moulded for Zone 1 operation. Can be delivered in different colour temperatures. Normally type cool white

Optic

 T8 version:
Diffuser in moulded impact-proof UV-resistant polycarbonate. Gasket in silicone moulded into the diffuser. Reflector on request.

LED version:
Diffuser in moulded polycarbonate with self-locking clips. White painted cover plate between components and light sources.

Electric

T8 version: 
With Ex-certified electronic ballast (HF). All electric components are mounted on a hinged geartray for easy maintenance. Ex micro-switches disconnecting the mains are operated by diffuser and make lamp replacement possible without disconnecting the circuit. Emergency versions available. AC 110 - 250V ± 10%, 50/60Hz.

LED version:
LED-tubes developed for optimum heat transmission from LED light sources. Electronic for LED in moulded housing meeting Ex-requirements and for maximum resistance regarding vibration and moisture. LED-tubes are fixed to gear tray and connected by 2 wires to driver. No lamp base

Housing

MAX S with housing in deep drawn stainless steel (AISI 316) for outdoor marine environment. IP66/67 Variants with housing in Aluzinc (MAX Z) for non corrosive environments.

Application

For mounting indoor and outdoor in Zone 1 areas

Design

According to IEC, Ex and maritime requirements

Approvals

ATEX, IECEx and CSA approved

Finish

Powder coated white RAL9016 in gloss 90 for easy maintenance.

 T8 version: 
Fixed end brackets as standard. Also available with M8 hood nuts for fixing on request.

LED version:
To be mounted on ceiling, cable trays or brackets welded to building construction.

T8 version:
One Ex cable gland and one blind plug each end (M20 or M25). Other gland configurations also available. One 6-way Ex screw terminal block 6 mm2 with special earth clamp for armoured cable each end. Through wiring (TW) 6 x 2.5 mm² as standard.

LED version:
One cable gland and one blind plug at each end as standard.
One 6-way Ex screw terminal block 6mm² each end. Through wiring 6 x 2,5 mm².

 

MIR MIX MAX T8
 Wattage L1
 C1  L C for Hood nut
 18W  724  704  681  On request
 36W  1334  1314  1291  On request
 58W  1634  1614  1591  On request

MAX T8

 Wattage L1
 C1  L C for Hood nut
 18W  724  704  681  On request
 36W  1334  1314  1291  On request
 58W  1634  1614  1591  On request
MAXZ67 218 PC W-BATTERY BOX
MAX Spareparts

MAX T8

Measurement drawings

MIR MIX MAX T8

Explosion drawings

MAX Spareparts

Light measurement drawings

MAXZ67 218 PC W-BATTERY BOX

Martin Linge FSO

martin-linge_hanne-knutsen_07

The former shuttle tanker Hanne Knutsen has been through a major conversion and is now operating on the Martin Linge oil field in the North Sea as a Floating Storage and Offloading vessel (FSO). A crew of 17 people will work in a three-step scheme that creates over 50 jobs at the FSO while its’s in operation. 

Lighting is of key importance to the crew on board the FSO. Glamox have supplied a high-quality lighting solution to the vessel. The package consists of EX lighting such as floodlights (FX60), technical lighting (TX60) as well as interior light and searchlights. 

View reference

Find your version

Use this button to find the exact version of this series, article numbers and more product details.


Documents

~3MB
~3MB

RFA-Revit-Files

Total size
Download