C50-SR
Surface row mounted luminaire with endless solutions
logo_brand_glamox
IP20 CE ENEC LED DIM emergency Daylight sensor pir_sensor row-mounting mounting_ld_surface_celing-2
c50-sr_wh_28_35_sl_su

C50-SR WH SU

Pictured version
c50-sr_wh_28_35_mp

C50-SR WH MP

Pictured version
c50-sr_wh_28_35_op

C50-SR WH OP

Pictured version

C50-SR

Design: Hans Bleken Rud
Glamox C50 is a complete product family with a wide range of optics and installation options designed for simplicity, flexibility and effectiveness. They are stylish and have a high quality finish, with a solid body and end caps in aluminium. Delivered in silver grey (RAL 9006) or white colour. Available with a wide range of optics suited for different applications like office/classroom lighting.

C50-SR is a slim and rigid surface mounted luminaire for plasterboard ceilings, especially for continuous row installations.

The luminaire is supplied with quick cable connection between luminaires, making continuous installation simple and efficient.

Sets with end caps must be ordered separately, so you only need to buy the exact number your solution requires.

In addition C50-SR can be recessed into solid ceilings using a special recessing bracket ordered separately.

For optimised energy savings, C50 can be supplied with integrated sensor for motion and daylight. The luminaires can also be delivered with integrated LED emergency light.

C50 is also available as a surface mounted single luminaire (C50-S).

Light source

LED 1500 - 4500 lumen out
Colour temperature 3000/4000 K, CRI Ra 80, MacAdams 3

Driver

Electronic ballast (HF) or DALI. Driver life time up to 100.000 h/10 % (max failure) at Ta 25°C.

Body material & colour

Aluminium body. Aluminium end caps must be ordered separately. Can be supplied in grey or white.

Mounting

For surface row mounting in ceilings or recessed in luminaire space of 92mm width. When recessed mounted a unique mounting bracket must be separately ordered.
Can also be pendant mounted but then suspension and balancing kit must be ordered separately.

Connection

The luminaire is always supplied with through wiring and quick connector plug in each end. Supplied is also one quick connector joint for each luminaire. Cable entry is on centre top. 3 or 5 pole push-in terminal block.

Optics

Double parabolic Softlight optic type SU, Opal diffuser type OP or Microprismatic diffuser type MP.

Integrated emergency light

LED emergency light type standard (S), Selftest (ST) and addressable DALI (DALI).

Integrated sensors

This product is available with a PIR sensor type SPR-SEN with relay based ON/OFF switch or a PIR sensor wired for Corridor function type SPC-SEN. It is also available with a combined PIR and Constant Light sensor with integrated DALI Power supply type MPP-SEN or a slave PIR version type MPS-SEN.

For more information see user manual for the respective sensor under “Download”.
web_c50-s_office2_sl

C50-SR

Product environment

web_c50-s_office2_sl
c50_sr_led_measurement drawing
 C50-SR LED  L (mm)
without
endcaps
 C (mm)
 C50-SR562 1500  562  460
 C50-SR843 2300  843  735
 C50-SR1124 3000  1124  920
 C50-SR1405 3800  1405  1200
 C50-SR1686 4500  1686  1480

C50-SR LED

 C50-SR LED  L (mm)
without
endcaps
 C (mm)
 C50-SR562 1500  562  460
 C50-SR843 2300  843  735
 C50-SR1124 3000  1124  920
 C50-SR1405 3800  1405  1200
 C50-SR1686 4500  1686  1480
energy-label_c50-s-sr_led

Measurement drawings

c50_sr_led_measurement drawing

Energy label

energy-label_c50-s-sr_led

Heathrow Airport LED upgrade

heathrow_airport_dsc7819park

Recently a major upgrade to LED lighting has been carried out, in cooperation with Glamox Luxo Lighting. The project includes a variety of key locations at the airport, such as terminals, control posts, car parks and more.

Important cost savings 
This investment in the latest energy-efficient technology will contribute to improved passenger ambience, and at the same time reduce the airport’s energy and CO2 consumption.

Heathrow has set a target to reduce its absolute CO2 emissions from fixed sources by 30% on 1990 levels by March 2020. Significant savings will also be made on maintenance costs:

Heathrow, a major hub airport, has particularly high costs of access for maintenance. In all areas maintenance can only be carried out during a few hours at night. The airport’s new LED lighting solutions are virtually maintenance free, so that 100% lighting levels can be upheld without cumbersome and time consuming light source changes.

Project descriptions

Project 1: Car parks at Terminals 2, 3 and 4
In the terminal car parks most of the lighting was provided by traditional 5ft 2x58 Watt corrosion proof luminaries, using approximately 122 Watt each. The airport was aiming to reduce energy costs and maintenance cycles, while improving the experience for the passengers/users.

Our solution
Looking at the client’s requirements and specifications for these area types, we looked at a one-for-one replacement using 4ft Glamox GPV2 LED running at 40 watt per fitting. This enabled us not only to meet the requirements, but also to use a third of the power consumption, showing massive energy savings.

In some circumstances 2ft GPV2 LED were used on the perimeters in place of single 5ft luminaries. Utilizing external light sensors and daylight switching, further reductions in the energy consumption were obtained. On the ground floor of the Terminal 3 car park we used the i80 at high level in place of discharge lights and incorporated occupancy sensors on alternate lights.
 
Product types: GPV2 LED & i80



Project 2: Terminal 4 entrance canopy (Arrivals)

The old terminal entrance lighting was on 24/7. Here the airport was using 250 Watt metal halide high bay luminaires recessed into the ceiling, which is 8 metres high. These luminaries had started to fail and fall into disrepair. The airport was looking at reducing the energy consumption and improving maintenance. Access was a major issue.

Our solution
By using Glamox i80 mounted within the recess and supplying an external bezel we actually improved the energy consumption by 69%, while contributing greatly to improved maintenance. With the aid of external daylight sensors some 70% of the luminaries are now switched off during daylight hours, thus providing further energy savings.

Product types: i80 LED 8000 DALI 840 MB HTG


 
Project 3: Passenger Subways linking Terminals 1, 2 and 3

The passenger subway linking the terminals at Heathrow were lit by a combination of linear fluorescent tubes and recessed and surface mounted CFL downlights. Subway transfers were not a particularly pleasant experience for passengers. It was important that we should be able to enhance the lighting in these areas.

Our solution
In cooperation with lighting designers Studio Fractal and installer Crown House Technologies, it was decided to redesign the entire system’s lighting scheme. We used Glamox C50-SR LED RGB for the wall wash. This makes it possible to change the colour of the walls in order to make the lighting more exciting. All recessed and surface mounted downlights were substituted with LED models. As a result, the passenger tunnels are now well lit and have a much more pleasant ambience.

Product types: C50-SR RGB, D70-R195 LED and i75 LED



Project 4: Security control posts

The vehicles security control posts are a particularly important part of an airport’s security system. All vehicles entering the airport area are thoroughly checked in full light, 24/7. The old 250 Watt metal halide floodlights at some of the control posts were failing, diffusers were discoloured and maintenance was becoming an issue.

Our solution
An upgrade was made at a total of four security control posts. Changing to Glamox GPV2 LED luminaires gave good energy savings and reduced maintenance costs. We also suggested the use of Glamox i80 mounted on the columns using our turnable bracket. This again gave good energy savings and reduced maintenance costs.  It also enhanced the lighting in these areas to a very high standard. Airport management is now looking to roll this out to other control posts across Heathrow. 

Product types: i80 and GPV2 LED
 
View reference

Find your version

Use this feature to find the exact version of C50-SR that you are looking for. Find article numbers and product details, spec sheets, lighting details, accessories and relevant documentation.


Documents

406KB
2MB
536KB
~3MB

RFA Revit Files

145KB

RFA Revit Files

Total size
Download

Related products

el0574_c50-s_wh_28_35_sl_su
el0574_c50-s_wh_28_35_sl_su

C50-S

Surface mounted luminaire with endless solutions