O70-S
Robust LED luminaire for ceilings and walls
logo_brand_glamox
IP66 CE ENEC LED dali emergency pir_sensor ik10 mounting_ld_surface_celing-2 mounting_ld_surface_wall-2
o70-s290_gr

O70-S290

o70-s290-e_gr

O70-S290-E

o70-s410_gr

O70-S410

o70-s410-e_gr

O70-S410-E

O70-S

Design: Hans Bleken Rud
Glamox O70-S is a solid-looking vandal proof luminaire (IK10) LED luminaire with a heavy aluminium body and opal polycarbonate diffuser.

This luminaire will not look out of place even in environments with rough surfaces such as concrete, bricks and stone. Typical applications for Glamox O70-S would be facades, staircases and entrance areas.

Two sizes. Two designs. Two colours.
Glamox O70-S is available in two different sizes, with a diameter of 290 or 410 mm. The aluminium body comes in aluminium grey or black paint with or without eyelid. Also available for indoor use. The indoor version is called Glamox A70. A70 has a lower IP rating suitable for indoor use.

Light source

LED 600 - 1800 lumen out
Colour temperature 3000/4000 K, CRI Ra 80, MacAdams 3

Driver

Fixed output (HF) or DALI dimmable (100-1%). Driver life time up to 100.000 h/10 % (max failure) at Ta 25°C.

Body material & colour

Housing in die-cast aluminium, painted in polyester powder paint in colour Aluminium grey (RAL 9006) or Black (RAL 9005). Diffuser is in impact resistant opal polycarbonate (PC).

Connection

5 pole push-in terminal block prepared for through wiring.

Outdoor use requires suitable flexible cables assuring the water tightness of the membrane gland.

Integrated emergency light

O70-S410 can be supplied with emergency lighting system.

Integrated sensors

This product is available with a Microwave sensor type SMR-SEN with relay based ON/OFF switch or a Microwave sensor wired for Corridor function type SMC-SEN.

For more information see user manual for the respective sensor under “Download”.
o70_wall_outdoor_glamox

Product environment

o70_wall_outdoor_glamox
o70-s410

O70-S410

o70-s290

O70-S290

o70-s290_eyelid
o70-s410_eyelid

O70-S410-E

O70-S410 LED 1800 840

O70-S410

O70-S410-E LED 1300 830

O70-S410-E

Measurement drawings

o70-s410 o70-s290 o70-s290_eyelid o70-s410_eyelid

Light measurement drawings

O70-S410 LED 1800 840 O70-S410-E LED 1300 830

A flourishing collaboration

dsc2205

Entering the flower auction buildings in Naaldwijk, one of four locations for the Dutch company Royal FloraHolland, is a mind-blowing experience. First – it’s the proportions. The airy distribution halls with their fragrant smell of flowers are the size of 11 football fields. Then it’s the logistics. For the 4-5 hours in which the auctions take place, an average of 46.000 pots or buckets of plants and flowers change hands. All these flowers are stored in Naaldwijk from the night before. As the auctions start the flowers are transported to the distribution hall in automotive carts. When the content of the carts has been sold, it is redistributed and taken to the customer’s area on fast-going vehicles. Literally kilometers of flowers pass through the distribution center every day. To the uninitiated eye it appears chaotic, but in reality, it is an extremely efficient system perfectioned over many years.

The auctions themselves are also an intriguing experience. There’s no auctioneer at the site, instead, fourteen “auction clocks” are used. The auction clocks are represented by large screens in the different bidding halls. Some of the bidders are physically present in the halls but an increasing number participate online. Thus, a bundle of flowers can as easily be won by a buyer in Russia as by a local trader. Either way the bidding is done from computers in a system that grants the buyers full anonymity. The benefit of turning up in person is the opportunity to inspect the plants and flowers. The online bidders rely on pictures, quality assessments and judgment sampling.

Successful collaboration

But the distribution hall is only a part of the Royal Flora Holland complex in Naaldwijk. All in all, the company disposes more than 900 000 square metres here, almost half the size of Monaco. Glamox has supplied lighting for the distribution halls, cooling halls, flower inspection area, offices and more. In addition, we are supplying a lot of the lighting for the Aalsmeer site. Adding up it has probably been more than 80.000 luminaires over the years. The history of the collaborations with the project department in Naaldwijk goes back more than three decades, to a time when both companies were smaller and had different names.
“The history stretches back to 1981 when I had just started working here. Glamox supplied the lighting to the first cooling hall, Aircofleur 1,” says Project Manager and head of the Project department Marcel Toussaint. Toussaint is among other things in charge of the areas that are rented out to customers. The areas comprise halls and office space and are the subject to continuous change as customers grow out of one location and is relocated to another. “The service we get from Glamox is quick and good”, Toussaint says. 
Even though the flowers themselves are more sensitive to temperature and humidity changes than to different lighting, finding the right lighting products and solutions for a place like the Naaldwijk complex isn’t straight forward.
“In general, we want products that have a high quality and that require little maintenance. A lot of dust is created in the areas where the flowers and plants are stored. Hence, we need dustproof luminaires. We also need products with good colour rendering so that our customers can assess the quality of the flowers properly, project manager Dennis Harteveld explains.

New times, new lighting

Harteveld’s colleague Frans Tulling, has been with the company since 2002. He has a background in architectural design, but enjoys the opportunity Royal FloraHolland gives him to work with a wide variety of projects. When it comes to lighting, he has seen a gradual development towards more user oriented solutions. Among other things, this has resulted in the implementation of lighting that can be tuned up to 4000 Kelvin. 
“Recent research shows that a more complete spectrum is healthier for people. It took some persuasion, but now it seems like people are happy with the results”, Tulling explains.
Although very favorable electricity prices make the economic incentive for replacing conventional light sources small, the company is now opting for a greener alternative by gradually phasing in LED products.
“We work very closely with Glamox to get the right input. Our company is not like any other and it takes time to understand how we work and what we need. That’s why we choose to work very closely with our suppliers. I also appreciate to have someone with the professional authority on lighting behind me when we make decisions about lighting,” Tulling says.

In the Royal FloraHolland maintenance department teamleader Peter Voogt and technician Sedat Sari also have long experience with Glamox products. “We are very satisfied about the way Glamox handle things.
“To us, Glamox stand for quality”, Sari says.

 Royal FloraHolland at a glance
• Mission: Flowering the World Together: Planting Seeds of Opportunity for our Members.
• Business model: Cooperative of horticulturists
• Turnover: 4 575 million Euros (2016)
• Delivered in units by regular (clock) auction: 6,504 million units of cut flowers, 276 million units of house plants, 276 million units of garden plants
• Locations: Aalsmeer, Naaldwijk, Rijnsburg, Eelde
• Total number of suppliers: 5908
• Total number of customers: 2493
• Top 10 flowers sold: Rose, Chrysanthemum, Tulip, Lily, Lysianthus, Gerbera, Chrysanthemum (disbudded), Cymbidium, Lysianthus, Freesia, Hortensia
View case study

Find your version

Use this feature to find the exact version of O70-S that you are looking for. Find article numbers and product details, spec sheets, lighting details, accessories and relevant documentation.


Documents

155KB
3MB
187KB
~3MB

RFA Revit Files

145KB

RFA Revit Files

Total size
Download

Related products

a70-s410_wh_ch
a70-s410_wh_ch

A70-S

Decorative LED luminaires for ceilings and walls