i75
LED armatuur voor verschillende toepassingsgebieden
logo_brand_glamox
ta-35 IP65 CE d-mark ENEC LED ik08 mounting_ld_pendant_celing_down-2 mounting_ld_surface_celing-2
i75_mb

i75 LED 1700/2500/4400 MB

i75_wb

i75 LED WB

i75_nb

i75 LED NB

i75_wb

i75 LED 6000 MB

i75

De Glamox i75 is een compact LED-armatuur voor pendel- en opbouwmontage. Het product is geschikt voor vele verschillende toepassingen, variërend van vergaderzalen, open ruimtes, bioscopen tot industriële gebouwen, magazijnen en koude opslaginstallaties. Het armatuur kan worden gebruikt in een omgevingstemperatuur (Ta) van 45°C tot -35 °C.

De armatuurbehuizing is vervaardigd uit gegoten en geëxtrudeerd aluminium en afgewerkt met een aluminium grijze (RAL 9006) epoxy/polyester poeder coating. Geleverd met een reflector in geanodiseerd aluminium en de afscherming in gelaagd glas of slagvast helder acrylaat. Doordachte installatie via de bovenzijde met eenvoudig toegang tot alle interne componenten.

Wij kunnen ook aangepaste oplossingen leveren voor de i75 om te voldoen aan klant specifieke eisen. 

i75_storage

Lichtbron

LED 1700-6000 lumen netto lichtstroom
Kleurtemperatuur 3000/4000 K, CRI Ra 80, Mac Adams 3

Voeding

Vaste uitgang (HF) of DALI dimbaar (10-100%). Levensduur driver tot 100.000 uur/10 % (max uitval) bij Ta 25°C.

Materiaal behuizing & kleur

De armatuurbehuizing is vervaardigd uit gegoten en geëxtrudeerde aluminium en afgewerkt met een aluminium grijze (RAL 9006) epoxy/polyester poeder coating. Geleverd met reflector van geanodiseerd aluminium en de afscherming van gelaagd glas of slagvast helder acrylaat. EPDM pakkingen. Schroeven uit roestvrij staal.

Montagewijze

Stabiele pendel op veerhaak voor verticale ophanging.
Ophanging voor montage aan kabelgoot of plafondbeugel voor installatie direct aan het plafond dienen apart te worden besteld.

Accessoires

Pendelsets

Aansluiting

3 x kabelinvoer (kabel Ø4 - 10 mm). 3 - of 5 polig 2,5 mm² aansluitblok steekklem geschikt voor doorvoerbedrading.

Buiten gebruik vereist geschikt flexibele kabels, die de waterdichtheid van de wartels verzekeren.

Optiek

Brede - (WB), medium - (MB) en smalstralende (NB) reflector in geanodiseerd aluminium. Afscherming in gelaagd glas (GL) of slagvast helder acrylaat (CL).
web_i75_storage_700x467
web_i75_kino_700x467
web_i75_molde_storsenter_354x467
i75_storage
reference_i75_outdoor_o34_stairs_d70-s_roof_glamox_vest_lofoten_vgs
i75_with_ceiling_bracket

i75 met plafondbeugel

Product detail

i75_with_ceiling_bracket

Product omgeving

web_i75_storage_700x467 web_i75_kino_700x467 web_i75_molde_storsenter_354x467 i75_storage reference_i75_outdoor_o34_stairs_d70-s_roof_glamox_vest_lofoten_vgs
g10540_i75
Type
 H
 i75 LED WB  177
 i75 LED 1700/2500/4400 MB  296
 i75 LED 6000 MB  177
 i75 LED NB  296

i75

Type
 H
 i75 LED WB  177
 i75 LED 1700/2500/4400 MB  296
 i75 LED 6000 MB  177
 i75 LED NB  296
i75 LED 2000LM HF 840 NB CL

NB-optiek

i75 LED 2000LM HF 840 MB GL

MB-optiek

i75 LED 2000LM HF 840 WB CL

WB-optiek

energy-label_i75_led

Maatvoeringen

g10540_i75

Lichtverdelingscurve

i75 LED 2000LM HF 840 NB CL i75 LED 2000LM HF 840 MB GL i75 LED 2000LM HF 840 WB CL

Energielabel

energy-label_i75_led

Heathrow Airport LED upgrade

heathrow_airport_dsc7819park

Recently a major upgrade to LED lighting has been carried out, in cooperation with Glamox Luxo Lighting. The project includes a variety of key locations at the airport, such as terminals, control posts, car parks and more.

Important cost savings 
This investment in the latest energy-efficient technology will contribute to improved passenger ambience, and at the same time reduce the airport’s energy and CO2 consumption.

Heathrow has set a target to reduce its absolute CO2 emissions from fixed sources by 30% on 1990 levels by March 2020. Significant savings will also be made on maintenance costs:

Heathrow, a major hub airport, has particularly high costs of access for maintenance. In all areas maintenance can only be carried out during a few hours at night. The airport’s new LED lighting solutions are virtually maintenance free, so that 100% lighting levels can be upheld without cumbersome and time consuming light source changes.

Project descriptions

Project 1: Car parks at Terminals 2, 3 and 4
In the terminal car parks most of the lighting was provided by traditional 5ft 2x58 Watt corrosion proof luminaries, using approximately 122 Watt each. The airport was aiming to reduce energy costs and maintenance cycles, while improving the experience for the passengers/users.

Our solution
Looking at the client’s requirements and specifications for these area types, we looked at a one-for-one replacement using 4ft Glamox GPV2 LED running at 40 watt per fitting. This enabled us not only to meet the requirements, but also to use a third of the power consumption, showing massive energy savings.

In some circumstances 2ft GPV2 LED were used on the perimeters in place of single 5ft luminaries. Utilizing external light sensors and daylight switching, further reductions in the energy consumption were obtained. On the ground floor of the Terminal 3 car park we used the i80 at high level in place of discharge lights and incorporated occupancy sensors on alternate lights.
 
Product types: GPV2 LED & i80



Project 2: Terminal 4 entrance canopy (Arrivals)

The old terminal entrance lighting was on 24/7. Here the airport was using 250 Watt metal halide high bay luminaires recessed into the ceiling, which is 8 metres high. These luminaries had started to fail and fall into disrepair. The airport was looking at reducing the energy consumption and improving maintenance. Access was a major issue.

Our solution
By using Glamox i80 mounted within the recess and supplying an external bezel we actually improved the energy consumption by 69%, while contributing greatly to improved maintenance. With the aid of external daylight sensors some 70% of the luminaries are now switched off during daylight hours, thus providing further energy savings.

Product types: i80 LED 8000 DALI 840 MB HTG


 
Project 3: Passenger Subways linking Terminals 1, 2 and 3

The passenger subway linking the terminals at Heathrow were lit by a combination of linear fluorescent tubes and recessed and surface mounted CFL downlights. Subway transfers were not a particularly pleasant experience for passengers. It was important that we should be able to enhance the lighting in these areas.

Our solution
In cooperation with lighting designers Studio Fractal and installer Crown House Technologies, it was decided to redesign the entire system’s lighting scheme. We used Glamox C50-SR LED RGB for the wall wash. This makes it possible to change the colour of the walls in order to make the lighting more exciting. All recessed and surface mounted downlights were substituted with LED models. As a result, the passenger tunnels are now well lit and have a much more pleasant ambience.

Product types: C50-SR RGB, D70-R195 LED and i75 LED



Project 4: Security control posts

The vehicles security control posts are a particularly important part of an airport’s security system. All vehicles entering the airport area are thoroughly checked in full light, 24/7. The old 250 Watt metal halide floodlights at some of the control posts were failing, diffusers were discoloured and maintenance was becoming an issue.

Our solution
An upgrade was made at a total of four security control posts. Changing to Glamox GPV2 LED luminaires gave good energy savings and reduced maintenance costs. We also suggested the use of Glamox i80 mounted on the columns using our turnable bracket. This again gave good energy savings and reduced maintenance costs.  It also enhanced the lighting in these areas to a very high standard. Airport management is now looking to roll this out to other control posts across Heathrow. 

Product types: i80 and GPV2 LED
 
Bekijk Referentie

Vindt uw versie

Gebruik deze functie om de gewenste versie te vinden van i75. Vindt artikelnummers en product details, specificaties, productbladen, accessoires en relevante documentatie.


Documenten

256KB
2MB
~3MB

Marketing materiaal

11MB

RFA Revit bestanden

145KB

RFA-Revit-Files

Totale grootte
Download