Connected emergency lighting is now – and the development of new, smarter solutions lessens your workload spent on emergency maintenance and makes your surroundings safer.
Smart buildings and connected emergency lighting
Fully integrated building management systems create a magnitude of possibilities. They allow you to adapt your emergency lighting solution to include new features, so that you are getting the most out of your lighting system. You can test them remotely and generate test reports, so you can rest assured that everything is working reliably and in accordance with the latest standards.
You need to perform testing
You are obliged to test your emergency light installation. You have to test the battery status, which means that you need to make sure that the batteries will charge and perform according to the required parameters. You also need to do a functional test of the luminaires in battery mode. This has to be done on a monthly basis on each luminaire, but not on all luminaires at the same time. The recommendation is for selected groups of luminaires to be tested every few days.
All this is required by law in order to ensure the safety of people in the building. This way, as a building owner or facility manager, you can guarantee that the emergency lights will work reliably in the event of an emergency.
Automatic emergency lighting testing
Manual testing of emergency lighting can be very time-consuming in large facilities. Our "Building-wide" systems for central monitoring are solutions that allow you to test the emergency lighting installation in a more automated way. These can also give you off-site, online access by adding our Glamox Connect. With a centrally monitored solution, you also get access to reports from the logging of all tests. All events can then be read in one and the same system: errors, error corrections, new tests, etc. are logged automatically and can then be sent to a public supervisor.
Our emergency monitoring systems
Regardless of whether your project is small or large, the customer offering is comprised of different systems. This includes both wired or wireless light management systems, as well as an online dashboard solution that gives you the possibility of choosing the options that are the best fit for your facility and needs.
Cabled controls system
Ethernet2Dali (E2D) is a cabled controls system based on our own DALI-2 application controller called Vertex. If you select your DALI emergency luminaires, you can connect, monitor, and perform automatic testing and reporting on your emergency lighting installation. Read more about E2D and how to plan and commission the installation here
Glamox emergency luminaires with DALI communication + Vertex gateway
Wireless controls system
Our wireless controls system, Glamox Wireless Radio, allows you to monitor your emergency lighting and perform automatic testing and reporting. To get this solution, you need to select wireless-ready emergency luminaires and an access point. Read more about Glamox Wireless Radio and how to plan and commission the installation here
Wireless emergency luminaires + access point
Glamox Connect
If you want to further improve the monitoring features, you can add Glamox Connect to your lighting control system.
This is an online dashboard solution where you can monitor and perform maintenance on your emergency lighting installation. It will lessen your workload with automatic testing and reporting, preparing the log and sending notifications to the person who is responsible for fixing issues that may arise.
Emergency monitoring is included in our free license version of Glamox Connect.
Do you have any questions?
We are happy to answer any inquiries you might have about our light management systems, big or small. Submit your e-mail address and we will contact you for an informal light management talk.